Presonus Temblor T10 Vs KRK 10S

What is a passive speaker? Passive speaker is a speaker who does not have the Amplifier (amplifier sound) in it. So, passive speakers require an extra amplifier to move it. Signal level should be strengthened in advance in order to drive the passive speakers. The majority of the speakers that we encountered was the passive speakers. For the best recommended results from us if you would like to have a passive speaker at home or in your living room is a Presonus Temblor T10 and KRK 10S. Both may have an excess of each, but who will you guys choose? Please read this article.

presonus temblor t10 vs krk 10s

Presonus Temblor T10
Presonus Temblor 10S is an excellent studio subwoofer that can increase monitoring of the low ends of tunes or merely to enjoy that bass in general. Temblor 10S comes with 10 inch transducers, a front-firing bass reflex and 250 watt class AB amplification. You will have a good response on this subwoofer by its 20 Hz to 130 Hz and it also can handle a high sound pressure level up to 113 and the 250 watts. The nicer features you can find in Presonus Temblor 10S is built in to help with eliminating RF, output-current limiting, over-temp control, transient on or off, a subsonic filter and external mains fuse. It is really one of our favorite audio interface creators so that alone gives us security knowing they come out with quality gear.

KRK 10S is a powerful 10s boasts a 10″ glass-aramid composite studio subwoofer with 2″ voice coil in an MDF enclosure which is capable of reproducing frequencies down to 28Hz. The features like extended low end sheds light on problem bass frequencies, adjustable crossover customizes sub response, and sensitivity switch for use with pro or consumer audio equipment. It also has 160-watt Class D amplifier faithfully pumps out 117 peak dB of tight with its back panel to let you customize your sub response with an adjustable crossover point, sensitivity switch, ground switches, and polarity. By adding KRK 10S to your system, it can be a way to find problem such as if you want the loudest mixes possible in small reduction and problem about frequencies that can throttle a mix. This speaker also can help you dial the perfect kick drum, electric bass, or synth and fine-tune the rumble of a train.

Presonus Temblor T10 Vs KRK 10S

Presonus Temblor T10KRK 10S
Key features- 10-inch glass-composite low-frequency transducer - 250 watt, Class AB amplification - Input gain control (-30 dB to +6 dB, continuously variable) and continuously variable low pass filter (50 Hz to 140 Hz)- The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D powered Amplifier dramatically increases transient response, control and punch, allowing you to properly engineer the low-frequency portion of the mix

Customer ratings*4.5 out of 5.0 stars5.0 out of 5.0 stars
Best deal*Save Money Please click hereSave Money Please click here

NOTE : Product prices, availability, ratings and save money information are accurate as of the date/time indicated on post time (as seen right bellow the tittle) and are subject to change. Any price, ratings, availability and save money information displayed on Amazon Site at the time of purchase will apply to the purchase of this product.

Presonus Temblor t10 is a nice round basses that can surprise you. We know that this speaker is in heavy competition with the KRK 10S, but it seems like KRK monitors is not neutral at all, but still the subwoofer from KRK seems nice too. They have their own advantages actually.

Leave a Reply

Your email address will not be published. Required fields are marked *